IPX4, IPX6, IPX8 and IP65 Explained: How Waterproof Is Your Torch?
Share
An IP rating shows how well a portable light keeps out dust and moisture: the first digit indicates dust protection, the second represents water resistance, and an X means that protection category was not declared. IPX4 covers splashes, IPX6 repels heavy rain and powerful jets, IPX7 covers temporary submersion, and IPX8 permits continuous immersion to a stated depth. Smiling Shark torches, headlamps, lanterns and work lights reach up to IPX6, handling Highveld storms but never submersion. Only our SD-Q-35 and Q-20 dive torches are rated IPX8, with a listed diving depth of 50 m.
What an IP rating actually tells you
An IP code, or Ingress Protection code, is an international classification defined under IEC 60529. IEC 60529 defines what codes such as IPX6 mean, describing how effectively an enclosure prevents solids and liquids from reaching internal electrical components. The ratings and figures on our pages are factory figures, as detailed in our guide to how we describe factory figures.
Why bother? Because water inside a torch shorts the electronics, and most torches that die from water die because someone took a rain-proof light somewhere it was never meant to go. Knowing the number stops that.
The second digit: water
The second numeral denotes liquid protection, ranging from dripping condensation to deep submersion. For everyday torches and lanterns, the key numbers are 4, 6, 7, and 8. A 4 defends against splashing water from any direction, while a 6 withstands powerful jets and heavy downpours. Ratings of 7 and 8 cover immersion under sustained hydrostatic pressure. Each step addresses a distinct type of moisture exposure.
The first digit: dust
The first numeral specifies protection against solids, ranging from large objects to fine dust. A rating of 6 is the highest standard level, designating a dust-tight enclosure. When dust protection is not formally declared under the standard, the letter X takes its place. An X does not mean the light has no dust protection, only that no dust rating was declared. Handheld torches typically carry an IPX designation, whereas permanent outdoor fittings benefit from a declared dust-tight rating against windblown soil.
IP ratings at a glance
This table summarises how each rating functions in practical outdoor conditions and how they apply across our product range.
| Rating | Dust (first digit) | Water (second digit) | What it means in practice | Smiling Shark lights with this rating |
|---|---|---|---|---|
| IPX4 | Not declared (X) | Splashing water from any direction | Light rain and splashes; not for heavy storms or immersion | Some torches, headlamps and lanterns (see table 2) |
| IPX6 | Not declared (X) | Powerful water jets | Heavy rain and spray; not for immersion | Most of our torches, headlamps, lanterns and work lights |
| IPX7 | Not declared (X) | Temporary immersion (commonly described as 1 m for 30 minutes) | Survives an accidental drop into water | None — we do not currently sell an IPX7 light |
| IPX8 | Not declared (X) | Continuous immersion under conditions the manufacturer states | Underwater use, only within the stated depth | SD-Q-35 and Q-20 dive torches, listed diving depth 50 m |
| IP65 | Dust-tight (6) | Water jets (5) | Permanent outdoor fittings exposed to dust and rain | 3031 and 3032 solar garden spotlights |
IPX7 and IPX8 are about immersion; IPX4 and IPX6 are not.
Is IPX6 waterproof?
An IPX6 torch is water-resistant, not waterproof in the swimming sense. It keeps out heavy rain and strong jets, making it dependable in a thunderstorm, on a wet campsite, or around spray-soaked coastal rocks. A Highveld storm while you check the gate is exactly what it's for. You can wipe it clean or briefly rinse it under a low-pressure tap to remove mud or salt spray, provided the rubber charging port cover is pressed firmly home.
However, IPX6 is not an immersion rating and cannot withstand continuous hydrostatic pressure. You must never take an IPX6 torch swimming, use it for snorkelling, drop it into a pool, or submerge it in a sink or bucket. If an IPX6 light falls into a puddle or dam, retrieve it immediately, switch it off, and dry the casing thoroughly. Most of our torches, headlamps, lanterns and work lights are IPX6: fine in a downpour, but they stay above water.
IPX4: rain and splashes only
IPX4 is the basic level: splashes from any side. Drizzle, mist, a spilt glass of water or wet hands are fine. Think of it as a light for inside the house when the power goes, or a dog walk on a calm evening.
Five Smiling Shark models carry an IPX4 rating: the SD-8107 handheld torch, two lightweight headlamps — the TD-0168D and TD-8030C — and two camping lights, the LY-8348 lantern and LY-8349 solar string light. While dependable indoors or under a covered veranda, they are not built for harsh weather. When a heavy storm hits, pack them away or switch to an IPX6 model.
IPX7 and IPX8: made for going under water
Water submersion demands an entirely different standard of protection. An IPX7 rating covers temporary immersion, commonly described as 1 m for 30 minutes, protecting gear dropped into shallow water. To be clear with our customers: we do not currently sell an IPX7 light; none of our models carries this rating.
IPX8 denotes continuous submersion under conditions specified by the manufacturer, rather than a universal standard depth. At Smiling Shark, only two models carry an IPX8 rating: the SD-Q-35 and Q-20 dive torches. Both feature a listed diving depth of 50 m on their product pages, and the Q-20 page explicitly notes that a maximum submersion time has not been specified. This listed 50 m depth applies strictly to these two diving torches and no other light in our range. Read more in our diving torch usage and safety guide or view our diving torch collection.
Charging a dive torch
Because dive torches operate under substantial water pressure, their charging arrangements differ from regular torches. The SD-Q-35 charges in its base (dock). The Q-20's 26650 battery is removed and charged externally. Full operating instructions and sealing checks are detailed in our diving torch usage and safety guide.
IP65: our solar garden spotlights
A light that lives in the garden all year gets baked, dusted, hit by the sprinkler and rained on. For these conditions, our 3031 (warm white) and 3032 (RGB) solar garden spotlights carry an IP65 rating.
The first digit, 6, denotes a dust-tight housing preventing grit and garden soil from penetrating optical or electrical parts. The second digit, 5, protects against water jets from any angle. Combined with full dust sealing, this makes IP65 ideal for garden beds exposed to constant weather. Find placement tips in our solar garden lights guide or browse our outdoor solar collection.
Which Smiling Shark lights carry which rating?
Every rating below is copied from the product page, except the three lanterns marked 'factory figure', which Smiling Shark has confirmed. If a model has no IP rating listed, it is not in this table.
| Rating | Category | Model |
|---|---|---|
| IPX8 | Dive torches | SD-Q-35, Q-20 |
| IP65 | Solar garden spotlights | 3031, 3032 |
| IPX6 | Torches | SD-5212, SD-7171, SD-7004, SD-7008, SD-7009, SD-5318, SD-X92, SD-X71, SD-1012, SD-1026, SD-5031, SD-5243, SD-5258, SD-7131, SD-7163C, ST-3420 |
| IPX6 | Headlamps | K-808, K-225B, TD-8018C, TD-0262, 0157C, 0125D, S-01F |
| IPX6 | Camping lanterns | LY-8228, LY-4010, YJ-5801, LY-8327C, LY-8223, LY-8320, LY-8336, 8308, LY-8322 |
| IPX6 (factory figure) | Camping lanterns | D-025, LY-8288C, LY-8265 |
| IPX6 | Work lights | GZ-0892, 5139, G-911B, TIP-7070 |
| IPX4 | Torch | SD-8107 |
| IPX4 | Headlamps | TD-0168D, TD-8030C |
| IPX4 | Camping lanterns | LY-8348, LY-8349 |
Some of our lights have no IP rating listed; keep those out of heavy rain. Never assume a light is waterproof if it lacks a published rating.
Which rating do you need? South African situations
Selecting the proper rating depends on your environment. South African conditions vary from dry interior dust to humid coastlines and sudden summer squalls. Indoors during power cuts, high-level water sealing is unnecessary. On 6 November 2026, Eskom reported that no national load-shedding had occurred since 16 May 2025; however, local load reduction continues, mainly in Gauteng, and load-shedding can return at short notice. An IPX4 light handles indoor outages effortlessly.
When stepping outside into a Highveld storm, driving muddy farm roads, or carrying gear in an open bakkie load bin, an IPX6 light is essential. Anglers facing ocean spray also need IPX6 sealing to avoid corrosive moisture damage. If your activities involve wading tidal gullies or diving, only an IPX8 torch provides adequate protection. The table below matches local conditions with recommended ratings and models.
| Situation | Rating to look for | Example Smiling Shark lights |
|---|---|---|
| Power cut at home, indoor use | Any (IPX4 is plenty) | TD-0168D headlamp, LY-8228 lantern |
| Walking the dog in drizzle | IPX4 or higher | SD-8107, TD-8030C |
| Highveld thunderstorm, checking the gate or yard | IPX6 | SD-5212, SD-7009, K-808 |
| Torch kept in the car or bakkie load bin | IPX6 | SD-5212, GZ-0892, 5139 |
| Campsite in the rain, hanging from the gazebo | IPX6 | LY-8327C, 8308, LY-8223 |
| Night fishing from rocks or the beach (spray, wet hands) | IPX6 | K-808 headlamp, SD-7008, LY-8327C |
| Wading surf or gullies where the light may go under | IPX8 | SD-Q-35, Q-20 |
| Scuba or snorkelling | IPX8 dive torch, within the listed 50 m | SD-Q-35, Q-20 |
| Garden lights left outside all year | IP65 | 3031, 3032 |
For detailed advice on vehicle kits, fishing, and camp lighting, consult our guides on car breakdown torches, night fishing gear, choosing a rechargeable headlamp, and our camping lantern buying guide. For a complete handheld overview, visit our torch buying guide.
Keeping the seal working
An IP rating depends on intact seals, gaskets, and port covers. To maintain protection over time, follow these maintenance rules from our torch maintenance guide:
- Press the charging port cover completely flat: The rubber flap is the primary barrier over the USB port. After charging, press the cover firmly into its seating groove until it sits flush with the casing.
- Never charge a wet light: Moisture in a charging socket causes pin corrosion and short circuits. If exposed to rain or spray, towel-dry the body and let the port dry fully before plugging it in.
- Rinse gently after salt or mud exposure: Salt crystals and mud degrade seals. Wipe the torch with a damp cloth or rinse briefly under a low-pressure tap with the port cover closed. Never submerge it in a sink or bucket, and towel-dry immediately.
- Keep threaded joints fully tightened: On torches with removable tail caps or bezels, screw them down firmly before wet-weather use so water cannot bypass the seals.
- Avoid high-pressure spray equipment: Never aim a high-pressure washer or car-wash lance at any torch or work light; IPX6 covers powerful water jets, not pressure washers.
- Inspect mechanical O-rings: Regularly check the rubber O-rings on threaded caps. Ensure they remain seated evenly, supple, and free of dirt, sand, or cracks.
Water damage and your 5-year warranty
Every Smiling Shark light has our 5-year replacement warranty against manufacturing defects (we replace, we don't repair), and the battery is covered for 6 months. That's our own warranty. The Consumer Protection Act (section 56) separately gives you repair, replacement or a refund for a defective product within 6 months of delivery. Lights bought through Takealot or our authorised Makro seller carry the exact same official warranty. The full terms are on our warranty claims page.
Our policy on water exposure is clear. The warranty covers “Water ingress caused by a defective seal (when used within the rated IP specifications)”. If an IPX6 torch leaks in heavy rain due to a defective seal, it qualifies for replacement. However, it excludes “Water damage from improper sealing, modification or use beyond the IP rating”. Submerging an IPX6 torch, modifying a housing, or leaving a port cover unsealed is not a manufacturing defect and is not covered. Read the full process in our warranty explanation guide.
Frequently asked questions
Can I rinse an IPX6 torch under the tap?
Yes, you can give an IPX6 torch a quick, gentle rinse under a low-pressure household tap to remove dirt, mud, or coastal salt spray. Before doing so, check that the rubber charging port cover is pressed down firmly into its recess. Never submerge the torch in a sink or bucket of water, and dry the entire casing thoroughly with a clean towel immediately after rinsing.
Can I take my torch or headlamp swimming or snorkelling?
No, you cannot take our standard torches or headlamps swimming, as none of them carry an immersion rating. Submersion requires a dedicated underwater housing capable of resisting continuous hydrostatic pressure. The only models in our catalogue suitable for swimming, snorkelling, or scuba activities are our IPX8 dive torches, the SD-Q-35 and Q-20, with a listed diving depth of 50 m.
Does IPX8 mean a torch works at any depth?
No, an IPX8 rating does not grant unlimited depth capability. Under international standards, IPX8 means the product withstands continuous immersion under specific parameters established by the manufacturer. For both our SD-Q-35 and Q-20 dive torches, there is a listed diving depth of 50 m. In addition, the Q-20 product page explicitly notes that a maximum submersion time has not been specified.
Do you sell an IPX7 torch?
No, we do not currently sell an IPX7 light in any product category. Lights rated IPX6 or below must never be dropped into water or left submerged. If your outdoor activities involve a genuine risk of regular water immersion, you should bypass intermediate ratings and select one of our dedicated IPX8 dive torches.
Is IP65 better than IPX6?
It is not a matter of one rating being strictly better than the other; they serve entirely different functional roles. IP65 includes a dust-tight rating of 6 paired with a water jet rating of 5, which is ideal for our 3031 and 3032 permanent solar garden spotlights. In contrast, IPX6 offers a higher level of water resistance against powerful water jets and heavy storms, but does not publish a declared dust rating.
My torch got soaked in the rain — what should I do?
First, turn off the torch and wipe down the exterior casing thoroughly using a dry cloth or towel. Check the charging port recess and ensure it is completely dry before inserting any charging cable. If moisture entered the interior casing while using the torch within its rated specifications due to a defective seal, submit a claim under our 5-year replacement warranty.
Can I charge a light while it is wet?
No, you should never connect a charging cable to a torch or lantern that is wet. Introducing electrical current to a damp charging port can cause immediate short circuits, terminal corrosion, or permanent failure of the internal circuitry. Always wipe down the light and allow the socket to dry out entirely before plugging it into a power source.
Is water damage covered by the warranty, including Takealot and Makro purchases?
Yes, if the water got in through a faulty seal while the light was used within its rated IP specification: that counts as a manufacturing defect under our 5-year replacement warranty, including lights bought on Takealot or Makro. Water damage from using a light beyond its rating, such as submerging an IPX6 torch, or from an open charging cover or a modification is not covered.
Not sure which rating your trip needs? WhatsApp us on +27 78 820 0076 and tell us where you're going. Or browse the torches, headlamps, camping lanterns, work lights, dive torches and solar garden lights.